Description:
Adjustable from 2-20 PSI. ORB-10 inlet and return ports. P/N 13212 provides (1) ORB-10 outlet port. (Requires AN-10 return line) Pressure rises on a 1:1 ratio when referencing boost.
Description:
For use with A1000 and Eliminator Fuel Pumps in carbureted application. Base pressure adjustable from 3-15 PSI. (1) ORB-10 inlet port and (1) ORB-08 return port. P/N 13224 provides (4)...More Details »
Description:
Base fuel pressure adjustable from 3-15 PSI. (1) ORB-10 inlet port and (1) ORB-08 return port. P/N 13204 provides (2) ORB-06 outlet ports and 1/8' NPT gauge port. Fuel pressure rises on a 1:1 ratio when referencing boost.
Description:
Platinum Series A1000 Carbureted Bypass Regulator Features a nickel finish. Base fuel pressure adjustable from 3-15 PSI. (1) ORB-10 inlet port and (1) ORB-08 return port. P/N 13204 provides...More Details »
Description:
Base pressure adjustable from 40-75 PSI. Gasoline and alcohol compatible. Fuel pressure rises on a 1:1 ratio with boost. 1/8' NPT gauge port. P/N 13101 provides (2) ORB-10 inlet ports and (1) ORB-06 return port.
Description:
Nickel finish. Base pressure adjustable from 40-75 PSI. Gasoline and alcohol compatible. Fuel pressure rises on a 1:1 ratio with boost. 1/8' NPT gauge port. P/N 13101 provides (2) ORB-10...More Details »
Description:
Performance EFI regulator designed for medium to high horsepower applications. Adjustable from 40-75 PSI, gasoline and alcohol compatible, P/N 13109 provides (2) ORB-06 inlet ports and (1)...More Details »
Description:
Compared to the A2000, there is 15% more flow across the entire pressure range. 6.8 gpm @ 5 psi / 13.5V (over 400 gph). ORB-12 inlet, ORB-10 outlet. Alcohol / Methanol compatible.
Description:
Adjustable from 5-12 PSI Provides ORB-06 inlet and outlet ports. 1/8' NPT gauge port included Regulator re-seats after the needle shuts down, preventing pressure creep.
Description:
Adjustable from 30-70 PSI. Equipped with removable AN-6 male fittings for inlet and outlet ports,Dedicated, 1/8' NPT gauge port located opposite the side inlet. Fuel pressure rises on a 1:1 ratio when referencing boost.
Description:
Provides two independent pressure adjustments; one adjustment for idle and one for wide open throttle. ORB-10 return port. P/N 13209 provides (1) ORB-08 inlet and (3) ORB-08 outlet ports.
Description:
Provides two independent pressure adjustments; one adjustment for idle and one for wide open throttle. ORB-10 return port. 1/8' NPT gauge port.
Description:
Allows any car or truck to affordably covnert from EFI to a standard carburetor. Bypass pressure adjustable from 8-16 psi, regulated pressure to carburetor is adjustable from 5-9 psi.
Description:
Adjustable from 5-12 PSI Provides 3/8' NPT inlet and outlet ports. 1/8' NPT gauge port included Regulators re-seat after the needle shuts down, preventing pressure creep.
Description:
Base fuel pressure adjustable from 3-15 PSI (1) ORB-10 inlet port and (1) ORB-8 return port. (2) ORB-6 outlet ports and 1/8' NPT gauge port. Fuel pressure rises on a 1:1 ratio when referencing boost.
Description:
Base pressure adjustable from 40-75 PSI Fuel pressure rises on a 1:1 ratio with boost 1/8' gauge port included Provides (2) ORB-10 inlet ports and one ORB-06 return port.
Description:
Allows control of multiple pressures with single fuel pump: Adjustable from 5-12 PSI. ORB-10 inlet and outlet flow-through ports (flange stackable), ORB-06 outlet ports, Includes (2) O-rings, (2) 12-point cap screws.
Description:
To be used with the Aeromotive A2000 Fuel Pump (P/N 11202) Adjustable from 4-8 PSI. ORB-12 inlet port. (Includes AN-12 to AN-10 male flare reducer fitting) P/N 13208 provides (4) ORB-06 outlet ports. 1/8' NPT gauge port.
Description:
To be used with the Aeromotive A2000 Fuel Pump (P/N 11202) Adjustable from 4-8 PSI. ORB-12 inlet port. (Includes AN-12 to AN-10 male flare reducer fitting) P/N 13210 provides (2) ORB-08 outlet ports. 1/8' NPT gauge port.
Description:
Base pressure adjustable from 30-70 psi Fuel pressure rises on a 1:1 ratio with boost Provides (2) ORB-06 inlet/outet ports and (1) ORB-06 return port 1/8'' NPT gauge port.
Description:
Carb to EFI pressures, N/A or forced induction, X1 is designed to span entire range of applications providing dependable fuel pressure regulation. 3-15psi (Works well with 11137 200lph up to 11104 Eliminator)
Description:
Carb to EFI pressures, N/A or forced induction, the X1 is designed to span the entire range of applications providing dependable fuel pressure regulation. 35-75psi (Works well with 11137 200lph up to 11101 A1000)
Description:
Carb to EFI pressures, N/A or forced induction, X1 is designed to span entire range of applications providing dependable fuel pressure regulation. 35-75psi (Works well with 11104 Eliminator up to 11102 Pro Series)